By clicking on the given links mentioned in this post, we may earn money from the mentioned companies. Thank you for your support in our small business!
This DIY is super duper adorable for your bedroom or any other room you’d like! Well… I guess that makes it super adorable for anything! I REALLY like how it turned out. It gives such a cute touch to our vanity. And besides, we will be together forever & always. Click To Tweet Another cute DIY Forever & Always Wood Sign where it only takes a few minutes and your supplies are limited. Let’s jump right into it!
What you’ll need:
- 3 Wood Boards – finished with the color you like
- Forever & Always Template
- Paint Brush and Brown Paint (not on picture)
- Black Marker, optional (not on picture)
- Finishing Spray, optional (not on picture)
How to do it:
Start off by taking your templates (Forever & Always Template) and fitting them on each wood board. My ‘forever’ and ‘always’ boards are 6 inch in length and 3 1/2 inch width. And my ‘&’ board is 3 1/2 inch x 3 1/2 inch. Take your pencil and trace over the words. Don’t be shy – color the words all the way in. You don’t have to press too hard tough.
Just experiment, the harder you press the more it is going to be visible later on.This was enough for me already, and I just pressed down a LITTLE harder than when I’m writing. But everybody has different hand pressures – so just find your own!What I’m saying is, you don’t have to press your hand out 🙂
Now write over the letters with brown paint. I also went around the outsides of the letters with a black markers to make the boarders look neater.Lastly spray or apply some finishing gloss to it if you desire. I used a lacquer spray from Home Hardware. I would recommend to use a finishing spray, because it gives a nice finish 🙂 Just kidding, it makes the paint more durable and last longer.What’ya think?
Comment your opinion below and keep browsing my other posts. xoxo